FD10050-20 : 2011 FCS Adjuster - Red
Allows for pad contact adjustment on any of our radial master cylinder brakes. Will not fit Oro or 2008-09 One and Mega.
Price: $56.95
FD10051-20 : 2011 FCS Adjuster - Gold
FD40123-20 : R1 Mixmaster Left
Replacement lever clamp that allows for direct mounting of SRAM Matchmaker compatible shifters directly to the brake lever clamp. Cleans up your bar clamping area and saves a few grams. R1/2010+ One only
Price: $34.95
FD40124-20 : R1 Mixmaster Right
FD-M046-15 : DH/R1 Pad Spring
Replacement pad spring for R1/One/Rx/Mega/One FR
Price: $1.55
FD-V105-12 : ONE/ONE FR/MEGA Pad Retaining Pin
Pad retaining pin for DH brakes, One, One FR and Mega.
Price: $4.70
FD40083-10 : Pad Retaining Pin E-Clip (1pc)
C-clip for pad retention pin. Used on all brakes except the R1
Price: $0.99
FD40116-10 : The One/One FR Caliper Bolt Kit
Replacement caliper bolt kit for the One and One FR.
Price: $36.14
FD40125-10 : Caliper Mounting Bolt Kit, Titanium - 4 pcs 6x18
Titanium caliper mounting bolts. Drops 12g vs. stock steel bolts. Use only for attaching caliper to adapter. NOT to be used for attaching adapter to frame or fork as this is a shearing load and requires a steel bolt.
Price: $84.50
FD52027-00 : The One Complete Caliper
The One caliper.
Price: $211.25
FD40117-10 : The One/One FR Caliper O-ring Kit
All O-rings used in One and One FR caliper.
Price: $28.39
FD40118-10 : The One/One FR Caliper Piston Kit
Caliper piston service kit.
Price: $33.09
FD40018-40 : R1/RX/Mega/One/One FR Hose Fitting Kit
Hose fitting kit for R1, One, One FR, Mega, and RX. It is recommended to always use a new compression nut when fitting a hose.
Price: $18.79
FD50143-00 : Mega/The One/RX 2010 Hose Kit (Blk)
Replacement hose for 2010+ brakes, stock on RX, R1, 2010+ One, Mega and One FR. One end of the hose is fitted with a factory banjo, the other end is left open for hose length adjustment. Hose length is 200cm.
Price: $70.41
FD-O037-00 : O-ring 3 x 1mm MC bleed port with integrated catch
3x1mm EPDM O-ring used in the R1 and my10 the One M/C bleed port
FD-V122-05 : The One MY10 Lever Pivot Screw 1pc (gold)
Lever blade pivot screw for One brake. Gold anodized aluminum. T15 Torx head.
Price: $10.09
FD-V121-05 : The One MY10 MC Clamp Bolt 1pc (gold)
M4x14 gold aluminum screw for One master cylinder clamp. T15 Torx head.
Price: $11.27
FD40125-20 : R1 Carbon Lever Blade Kit 1pc
Carbon lever blades save 8g vs. Aluminum blades. Fits R1 and 2010+ the One. Note: Carbon lever blades are NOT compatible with Tool Free Reach Adjust (TFRA).
Price: $122.05
FD40103-10 : DH/R1/RX/RO Sintered Pads
Sintered metallic pad compound resist heat better than organic and offer better modulation.
Price: $32.95
FD40001-50 : Rotor Bolt Kit T25 Steel (6 pcs)
Stock steel rotor bolt kit. T25 Torx head.
Price: $3.75
FD40153-20 : Tool Free Reach Adjust (TFRA) - Red
This replacement pushrod kit retrofits a tool free lever reach adjustment knob onto either the R1 or model year 2010+ One brake with a 7.7mm pusrod pivot.
Price: $37.95
FD40154-20 : Tool Free Reach Adjust (TFRA) - Gold
FD40117-20 : R1/MY10 One Pushrod Kit (6mm pushrod pivot)
Pushrod kit for R1 and 2010+ version of The One. 6mm pushrod pivot. Note: There have been two pushrod pivot sizes used on the R1 and 2010+ The One brakes. In general 2009-2010 R1s and 2010 The One will use a 6mm diameter pushrod pivot. 2011 R1 and One brakes use a 7.7mm pushrod pivot to accommodate the Tool Free reach adjuster. Be sure to measure before ordering to make sure the pushrod pivot diameter and pushrod pivot drilling in the lever are compatible.
Price: $41.30
FD40116-20 : R1/MY10 One MC Piston Kit
Master cylinder piston kit for R1 and 2010+ version of The One
Price: $22.54
FD40118-20 : R1/MY10 One MC Bleed Port Screw & O-ring Kit
Master cylinder bleed port screws and O-rings for the R1 and 2010+ version of the One.
Price: $13.61
FD40119-20 : R1 MC Clamp (polished) & Screws (red)
Replacement clamp and screws fits R1 and 2010+ version of the One, stock on 2011 R1. Polished, forged aluminum clamp and red aluminum screws.
Price: $23.46
FD53087-00 : The One Complete MC
Flip-flop complete master cylinder will work for front or rear brake. Compatible with One and R1 caliper.
Price: $248.80
FD40148-20 : The One MY10 MC Clamp (blk) & Screws (gold)
Replacement clamp and screws fits 2010+ version of the One and R1, stock on 2010+ One. Black, forged aluminum clamp and gold aluminum screws.
FD40151-20 : R1/The One MY11 Pushrod kit (7.7mm pushrod pivot)
Pushrod kit for R1 and 2011+ version of The One. 7.7mm pushrod pivot. Note: There have been two pushrod pivot sizes used on the R1 and 2010+ The One brakes. In general 2009-2010 R1s and 2010 The One will use a 6mm diameter pushrod pivot. 2011 R1 and One brakes use a 7.7mm pushrod pivot to accommodate the Tool Free reach adjuster. Be sure to measure before ordering to make sure the pushrod pivot diameter and pushrod pivot drilling in the lever are compatible.
Price: $37.55
FD40157-20 : The One 2011 Lever Blade Kit (blk, 7.7mm pushrod pivot drilling)
Replacement black forged aluminum lever blade for 2011+ versions of The One with 7.7mm pushrod pivot. Also fits 2011 R1.Note: There have been two pushrod pivot sizes used on the R1 and 2010+ The One brakes. In general 2009-2010 R1s and 2010 The One will use a 6mm diameter pushrod pivot. 2011 R1 and One brakes use a 7.7mm pushrod pivot to accommodate the Tool Free reach adjuster. Be sure to measure before ordering to make sure the pushrod pivot diameter and pushrod pivot drilling in the lever are compatible.
Price: $61.02
The Hive
@bythehive